برد دیسکاوری STM32F429I-STM32F429I Discovery Board

جزئیات

 ماژول STM32F429  شامل موارد زیر می باشد:

1. ال سی دی 2.4  QVGA TFT

2. حافظه SDRAM خارجی 64 مگابیتی

3. ژیروسکوپ ST MEMs

4. کانکتور USB OTG micro-AB

5. مجموعه LED

6.دکمه‌های فشاری

6 تا  LED بکار رفته جهت نمایشی عملکردهای زیر می باشد:

LD1 (قرمز/سبز) برای نمایش ارتباطات USB

LD2 (قرمز) برای نمایش برقراری منبع تغذیه 3.3 ولتی

LD3 (سبز) و LD4 (قرمز) برای نمایش دو کاربره بودن

LD5 (سبز) و LD6 (قرمز) مرتبط با USB OTG به ترتیب برای حالت‌های VBUS و اضافه جریان (OC)

برای دیدن مجموعه کاربردهای بالقوه این ماژول می توانید به سایت   www.st.com/stm32f4-discovery to support quick evaluation and development مراجعه نمایید.

توضیحات انگلیسی

STM32 Discovery kits are a cheap and complete solution for the evaluation of the outstanding capabilities of STM32 MCUs. They carry the necessary infrastructure for demonstration of specific device characteristics, a HAL library and comprehensive software examples allow to fully benefit from the devices features and added values.  

Extension connectors give access to most of the device’s I/Os and make the connection of add-on hardware possible.

With the integrated debugger/programmer the discovery kits are ideal for prototyping

The STM32F429 Discovery helps you to discover the high-performance microcontrollers of the STM32 F4 series and to develop your applications easily. It offers everything required for beginners and experienced users to get started quickly.

Based on the STM32F429ZIT6, it includes an ST-LINK/V2 embedded debug tool, a 2.4" QVGA TFT LCD, an external SDRAM of 64 Mbits, a gyroscope ST MEMs, a USB OTG micro-AB connector, LEDs and pushbuttons.

A large number of free ready-to-run application firmware examples are available on www.st.com/stm32f4-discovery to support quick evaluation and development.

مشخصات انگلیسی

STM32F429ZIT6 microcontroller featuring 2 MB of Flash memory, 256 KB of RAM in an LQFP144 package
On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone
ST-LINK/V2 (with SWD connector for programming and debugging)
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
SDRAM 64 Mbits
L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope
Six LEDs:
LD1 (red/green) for USB communication
LD2 (red) for 3.3 V power-on
Two user LEDs:LD3 (green), LD4 (red)
Two USB OTG LEDs:LD5 (green) VBUS and LD6 (red) OC (over-current)
Two pushbuttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing