سنسور فاصله سنج نوری 5 تا 100 میلی‌متر Omron در مدل‌های مختلف

توضیحات

Sensing method: Diffuse-reflective

Sensing distance: 5mm to 100mm (White paper 100 x 100 mm)

Differential distance: 20% Max. of sensing distance

Light source: Infrared LED

Power supply voltage: 12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.)

Current consumption: 30 mA DC Max.

Control output (Output type): NPN open collector output

Control output (Load current):  0 to 100 mA

Control output (Residual voltage):

 (DC) 1 V Max. (Load current: Less than 10mA)
(DC) 2 V Max. (Load current: 10 to 100 mA)

Operation mode: Light-ON/Dark-ON selectable

Load power supply voltage: 26.4 VDC Max.

Protective circuit:

Surge suppressor
Output short-cut protection
Output short-circuit protection
Power supply reverse polarity protection
Mutual interference prevention

Response time: 1 ms Max.

Sensitivity setting: Single-turn adjustment

Ambient illuminance: Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.

Ambient temperature:

Operating: -25 to 55℃
Storage: -40 to 70℃
(with no icing or condensation)

 Ambient humidity:

 Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)

Insulation resistance: 20 MOhm Min. at 500 VDC between charged parts and the case

Dielectric strength: 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance: 500 m/s**2 for 3 times each in X, Y, and Z directions

Degree of protection: IEC60529: IP67

Connection method: Pre-wired models （Cable length: 2 m）

Indicator: Operation indicator (orange), Stability indicator (green)

Tightening torque: 0.5 N・m Max. (with M3 screw)

Material (case): PBT

Material (lens): Denatured Polyarylate

Accessories: Instruction manual