سنسور غیرلمسی مادون قرمز تشخص نور، فاصله و رنگ GY-9960-3.3 APDS-9960 RGB

توضیحات

APDS-9960 gesture recognition / motion direction recognition module

The APDS-9960 is an ambient light sensor with integrated ALS, infrared LED and proximity detector and ambient brightness sensing (ALS, Ambient Light Sensing). It uses a dual photodiode to approximate 0.01 lux illumination to approximate the visual response of the human eye. , having programmable upper and lower threshold interrupt function, up to 16-bit resolution, even in dark colored glass was also highly flexible operation, the proximity sensor can be a fully tuned object detection 100 mm, sub-assembly and the terminal device exemption Factory calibration requirements. The ambient light dynamic range has also increased from the previous 10K lux to 30K lux, and the solar calibration has been greatly increased to 50K lux, which greatly improves the sensitivity and avoids strong light interference. It can work accurately under the large 1.0mm Air Gap without external isolation processing, which greatly facilitates the customer's structural design. Its waiting state power - 90μA typ, the sleep mode power - 2.2μA typ, more energy savings; up to 400kHz (I2C fast mode) dedicated interrupt pin, an I2C compatible interface, fully integrated solutions to facilitate circuit design and structure , I believe that can bring users a better design experience and product value!
Built-in APDS-9960 sensor for ambient light and color measurement, proximity detection and non-contact gesture detection. With this RGB and gesture sensor, you can control a computer, a microcontroller, a robot, and it's much more powerful than your hand with a simple swipe! In fact, the gesture sensor APDS-9960 was used in the Samsung Galaxy S5.
Can be applied to ambient light and RGB color sensing, proximity detection, gesture detection .
With four infrared sensors, you can measure the light reflectance of each base position over time and convert those changes into gestures. Our interface library can detect directional gestures (left to right, right to left, top to bottom, bottom to top), but theoretically more complex gestures such as zigzag, clockwise or counterclockwise, near It is achievable to be far.
Product parameters:
Working voltage: 3.3V
Measuring range: 4-8in (10-20CM
Interface type: I2C interface
INT : Interrupt output
SCL : I2C clock port

SDA: I2C data port
VCC: power supply positive input port, connect 2.4V-3.6V voltage (3.3V recommended)

GND: power supply negative input

VL: External IR LED power supply. Must be 3.0 - 4.5V